|
Complete Engine Kit Contains: Liners, Pistons, Rings, Pins, Bushings, Valves, Rod
& Main Bearings, & Thrust Washer |
A17042TCEK |
1 Per Engine *Late T Cross Drill
Crankshaft |
|
Complete Engine Kit Contains: Liners, Pistons, Rings, Pins, Bushings, Valves, Rod
& Main Bearings, & Thrust Washer |
A17042NONTCEK |
1 Per Engine *Early Non-T Drill
Crankshaft |
|
Liners |
226-4552 |
12 Per Engine |
|
Pistons |
224-3031 |
12 Per Engine |
|
Rings |
41829 |
12 Sets Per Engine |
|
Pins 223-1 (N/A) Bushings 223-3 |
223-1841 223-3631 |
12 Per Engine (Included With
Piston) |
|
Valves—Intake (N/A) Exhaust
(N/A) OR Intake & Exhaust For Lean Burn (N/A) |
211-4008 (30’ Seat w/Stellite Face) 211-4009 (30’ Seat w/Stellite Face) OR 211-4013 (20’ Face
w/Inconel Head) |
6 Per Engine 6 Per Engine OR 12 Per Engine |
|
Rod Bearings— *Series 205007
Upper Half Oil Holes 20 Degrees From Split, Dowel Pin in Cap |
CB-973P(U) CB-973P(L) |
12 Per Engine 12 Per Engine |
|
Rod Bearings— *Series 205407C,D,H & J Upper Half Locating Lug Centered, Dowel Pin
in Cap |
CB-1396P(U) CB-973P(L) |
12 Per Engine 12 Per Engine |
|
Rod Bearings— *Series 205507
Upper Half Locating Lug Centered, Lower Half Has Locating Lug |
CB-1396P(U) CB-1397P(L) |
12 Per Engine 12 Per Engine |
|
Main Bearings— *For Early Non-”Tee Cross Drill”
Crankshaft (Not Sold in Pairs) |
1-4-7
(2)MB-2608P(U) 2-3-5-6
(2)MB-2609P(U) |
6 Per Engine 8 Per Engine |
|
Main Bearings— *For Late “Tee Cross Drill” Crankshaft (Not Sold in Pairs) |
1-4-7 MB-3099P(U) 1-4-7 MB-3100P(L) 2-3-5-6
MB-3101P(U) 2-3-5-6
MB-3102P(L) |
3 Per Engine 3 Per Engine 4 Per Engine 4 Per Engine |
|
Thrust Washer |
TW-440S |
1 Set Per Engine (Order Separately) |
|
Crankshaft/Vibration Damper (N/A) |
229-5538 |
1 Per Engine |